- All
The below temperature resistances are simplified and refer to the steam temperature when reaching the ironing machine. Usually the steam cools before hitting the clothing (and the ironing cover) and there are intervals between the hot periods when you use the iron or the press is closed and steam streams through the covering. Please avoid to close presses longer than necessary for the pressing cycle (e.g. at working breaks) in order to preserve the ironing covers.
In case you require data about the heat resistance of fibres at permanent direct contact to hot metal surfaces please download a list with physical properties of fibres.
Standard cover on ironing tables.
Very smooth and very permeable!
Standard colours: blue, turquoise or light olive
Different colours available at 1000 meters annual consumption.
Length of rolls: abt. 50 meters
Width: 150 cm
Used on ironing tables as very permeable final cover allowing the steam to pass through easily.
The smooth surface speeds up processing time as it is excellent for quick spreading of the garment.
V-Max Aramid is heat resistant up to 250°C (480°F).
Due to the limited availability of orginal DuPont Nomex® Aramid fibres we can only ensure the continous production of articles which are containing Aramid fibres by using also Aramid fibres from different manufacturers. We are sure that you will not find a change of quality at the V-Max Aramid products.
Standard colours: blue and white
Weight: abt. 130 g/m²
Length of rolls: abt. 30 meters
Width: 160 cm
This fabric is mainly used on ironing tables and presses as very heat resistant and long lasting final cover
which does not melt or burn even at high temperature.
Weight: abt. 200 g/m²
Length of rolls: +/- 60 meters
Width: 160 cm
Used on ironing tables and presses as final cover.
Weight: abt. 200 g/m²
Length of rolls: +/- 60 meters
Width: 160 cm
Used on ironing tables and presses as final cover.
Weight: abt. 260 g/m²
Length of rolls: +/- 60 meters
Width: 200 cm
Used on ironing tables and presses as firm final cover and for transport belts.
VOMATEX developed the VOMAT bristle covers especially for ironing velvet and similar fabrics.
The close standing bristles prevent from shine and give a rough finish.
Simply put the fluffy side of the fabric on the bristle side of the cover and iron the left side (inside) of the clothing. The right side will remain fluffy while the left side can be ironed smooth and even.
VOMAT bristle covers are supplied in running meters at 160 cm width and therefore can be cutted easily and at low cost for any kind of machine.
Length of rolls: +/- 10 meters
Width: 160 cm
This material is VOMAT bristle cover M III backed with a V-Max Aramid-needlefelt and thus it can be fixed directly to the upper plate of presses
VOMAT bristle cover M 300 NO can be dressed very well.
It should be fixed to the upper metal plate of clothing presses with some glue spots. For glueing we recommend our silicone-paste.
V-Max Aramid is heat resistant up to 250°C (480°F).
Weight: abt. 200 g/m²
Standard colour: white
Length of rolls: abt. 30 meters
Width: 250 cm
Actually we have a remainder with abt. 110 cm width in our special offers
and also some 250 cm wide pieces with discoloured areas.
Used on steaming tables and presses as heavy and very heat resistant final cover which does not melt or burn even at high temperature.
Also for textile transport belts which do not burn or melt even at high temperature.
Width: 110 cm
Used on presses as very heat resistant and formable final cover which does not burn or melt even at high temperature (e.g. wrinkle-free treatment).
The napping offers a surface without textile structure.
Moreover the material becomes thicker almost like a thin felt.
Smooth fabrics which were developed for airbags (e.g. for steam dummys), easy sliding (e.g. at seam opening) or just easy to clean.
Length of rolls: +/- 50 meters
Width: 190 cm
Used as almost impermeable air bag cloth.
Length of rolls: +/- 30 meters
Width: 160 cm
Used as almost impermeable air bag cloth.
Length of rolls: +/- 30 meters
Width: 150 cm
This monofilament is used on ironing tables and presses as a very smooth and steam permeable cover, e.g. for opening seams.
Weight: +/- 330 g/m²
Width: +/- 140 cm
Used on presses as very smooth and permeable final cover which does not absorb glue residue and thus can be cleaned easily and be used again.
Excellent heat resistance up to 330°C!
If you require an absolutely smooth and stiff surface please take a look at our PTFE coated fabrics.
Colour: raw white
Width: 160 cm
Length of rolls: 50 meters
Used on fusing machines as heat resistant and glue repellent cover
and as an impermeable air bag fabric for dummies.
Colour: raw white
Thickness: 0.20 mm
Width: 100 cm
Length of rolls: 50 meters
Used on presses as heat resistant and glue repellent cover.
The unperforated quality is impermeable.
Colour: raw white
Thickness: 0.20 mm
Width: 100 cm
Length of rolls: 50 meters
Used on presses as heat resistant and glue repellent cover.
Permeable due to perforation.
Colour: white / grey
Thickness: 0.60 mm
Width: 100 cm
Length of rolls: 50 meters
Heat resistance: up to 550°C
Used on ironing tables and presses as heat insulation, especially for the back of the upper press plate.
The white side should face to the heat source.
If you require an absolutely smooth and stiff surface please take a look at our PTFE coated fabrics.
Colour: nature
Length of rolls: 60 meters
Minimum quantity: 60 meters
Width: 160 cm
Used on ironing tables and presses
as cheap final cover for frequent exchange.
Napped cotton fabric
Thickness: 3 mm
Length of rolls: 30 meters
Widths: 100 cm, 140 cm, 160 cm or 200 cm
Used as an intermediate layer on ironing tables and
on fusing machines as cleaning fabric.
